China 1.14 inch Long Strip IPS High Brightness screen Manufacturers, Suppliers, Factory

Some customers are still not very clear about the resolution of the display screen. We will explain it here. The resolution of the LCD screen refers to the number of pixels of the LCD screen, that is, the number of dot matrix, which is usually the number of pixels in the horizontal direction multiplied by the number of pixels in the vertical direction. Under the same LCD screen size, the higher the resolution dot matrix, the clearer and more delicate the display image effect is.

Shenzhen Hongjia Technology is a manufacturer specializing in the production of Transflective LCD modules, accepting customization, and has developed and mass-produced 2.0-inch Transflective LCD, 2.2-inch Transflective LCD, 2.4-inch Transflective LCD, 3.0-inch Transflective LCD, 3.5-inch Transflective LCD, It has the characteristics of visible under sunlight, full viewing angle, ultra-low power consumption, etc., and is very popular among customers.

The LCD TE pin, defined as the "Tearing Effect," primarily serves a data synchronization function, converting analog signals captured by the camera into digital image signals. The host then transmits these digital image signals to the display, which can cause image tearing. To address this issue, the TE function was introduced, allowing a complete, tear-free image frame to be transmitted to the display. Screen clipping can often occur when using a portrait screen as a landscape screen if improperly configured. If the LCD screen has a TE interface, it is recommended to connect the TE pin.

Shenzhen Hongjia Technology has now successfully mass-produced a 2.86-inch bar-type display that supports QSPI, MCU, and SPI interfaces. This allows for MCU-based operation, helping customers lower overall system costs while enhancing product competitiveness and profitability.

HJ2410-02. This model boasts a resolution of 480x640, a contrast ratio of 1200:1, and supports 16 million true colors, delivering sharp, high-definition visuals. With a brightness range of 600 to 1000 nits, it supports both RGB and MIPI interfaces and utilizes either the ST7701S or JD9161C driver IC. Furthermore, it can be shipped as a pre-laminated assembly paired with a capacitive touch screen; the touch screen's flex cable and the LCD's flex cable are integrated into a single output cable. This design is highly hardware-engineer-friendly, as it conserves space on the mainboard and simplifies circuit routing.

Completely eliminating LCD light leakage is difficult (especially against a pure black background, where slight light leakage may occur at the edges). However, through optimized design (such as high-precision shading structures and zoned light control), the use of high-quality materials (such as low-defect light guide plates and high-light-shielding adhesive strips), and rigorous production processes (such as full lamination and precision assembly), light leakage can be significantly reduced. Shenzhen Hongjia Technology has 12 years of industry experience, specializing in the research and development, production and sales of 1.14-inch to 12.1-inch LCD screens and matching touch screens. It has rich experience in dealing with backlight leakage and can meet the demanding requirements of our customers. We can also accept customization. Customers are welcome to email us for consultation.