EnglishEnglish
Home > Products > 2.4 inch Sunlight-readable display MCU 16BIT

China 2.4 inch Sunlight-readable display MCU 16BIT Manufacturers, Suppliers, Factory

With this motto in mind, we now have turn out to be amongst quite possibly the most technologically innovative, cost-efficient, and price-competitive manufacturers for 2.4 inch Sunlight-readable display MCU 16BIT,2.4 inch tft display interface MCU 37PIN ILI9341,2.4 inch lcd display 240*320 37PIN,2.4 inch tft lcd 240*320 37PIN ILI9341,2.4 inch TFT High Brightness screen 240*320 ILI9341, We have been keeping chasing WIN-WIN problem with our purchasers. We warmly welcome consumers from everywhere in the planet coming in excess of for a visit and establishing long-term connection.
2.4 inch Sunlight-readable display MCU 16BIT, Our factory is equipped with complete facility in 10000 square meters, which makes us be able to satisfy the producing and sales for most auto part solutions. Our advantage is full category, high quality and competitive price! Based on that, our goods win a high admiration both at home and abroad.

Related Products

Hot Products

  • 3.5 inch Touch LCD Module

    3.5 inch Touch LCD Module

    As the professional manufacture, we would like to provide you HONGJIA 3.5 inch Touch LCD Module. 3.5 inch Touch LCD wide viewing angle 320*480 resolution GT911, interface IIC, GFF structure.
    size : 3.5 inch
    Number of Pixels : 320*480
    Viewing direction : 12：00
    LCM Driver IC : ILI9488
  • 0.99 inch Round LCD

    0.99 inch Round LCD

    This product is a 0.99 inch Square LCD that supports 4-wire SPI interface and 128*115 resolution. It can be used in consumer electronics, wearables, remote controls and other devices. If the 0.99 inch round LCD does not meet your company's requirements, we can also accept customization.
    size: 0.99 inch
    Number of Pixels: 128*115
    Viewing direction: ALL O’CLOCK/ IPS
    LCM Driver IC: GC9107
  • 1.3 inch Square LCD Module

    1.3 inch Square LCD Module

    HONGJIA is a professional 1.3 inch Square LCD Module Interface MCU/SPI manufacturer and supplier in China. 1.3inch square LCD module supports MCU/SPI interface, IPS full viewing angle 24PIN plug-in.
    size : 1.3 inch
    Number of Pixels : 240*240
    Viewing direction : ALL O’CLOCK/ IPS
    LCM Driver IC : ST7789
  • 3.1 inch TFT LCD MODULE 480x800

    3.1 inch TFT LCD MODULE 480x800

    You can rest assured to buy HONGJIA 3.1 inch TFT LCD Module from our factory and we will offer you the best after-sale service and timely delivery. 3.1 inch TFT LCD module IPS 480*800 resolution ST7701S high contrast, MIPI with touch interface
    size: 3.1 inch
    Number of Pixels: 480*800
    Viewing direction: ALL
    LCM Driver IC: ST7701S
  • 1.14 inch Long Strip LCD Module

    1.14 inch Long Strip LCD Module

    HONGJIA is a professional 1.14 inch Long Strip LCD Module manufacturer and supplier in China. 4-wire SPI, IPS sunlight readable 13PIN, 135*240.
    size : 1.14 inch
    Number of Pixels : 135*240
    Viewing direction : ALL O’CLOCK/ IPS
    LCM Driver IC : ST7789
  • 3.5 inch IPS with Capacitive Touch Screen 480x800

    3.5 inch IPS with Capacitive Touch Screen 480x800

    HJ3500-06 is a 3.5 inch Touch LCD MIPI interface, interface I2C, Integrated display and touch screen, integrated with a flat cable for easy design, GT911 touch IC, MIPI interface, 30pin standard plug, 480*800 resolution, can be used in medical equipment, blood oxygen meter, handheld detection instrument, law enforcement instrument, vehicle-mounted equipment and other products, our company can accept customization according to customer requirements.
    Size: 3.5 inches
    Resolution (Number of Pixels): 480*800
    Viewing direction: ALL O’CLOCK/ IPS
    Driver IC (LCM Driver IC): ST7701
  • Related Blog
  • Reviews

  • Advantages and disadvantages of SPI interface and QSPI interface for small-size LCD screen

    In short, for small-sized LCD screens, QSPI is a better choice: through pin multiplexing and queue mechanism, while maintaining sufficient transmission rate, PCB design and master control resource usage are greatly simplified, which is especially suitable for scenarios that require dynamic display and limited space. SPI is only applicable to extreme cases where the driver IC does not support QSPI or has extremely simple functions. When actually selecting, it is necessary to first confirm the interface specifications of the screen driver IC (some screens support both SPI and QSPI, which can be switched by configuring pins).

  • Shenzhen Hongjia Technology produces a variety of Transflective LCD

    Shenzhen Hongjia Technology is a manufacturer specializing in the production of Transflective LCD modules, accepting customization, and has developed and mass-produced 2.0-inch Transflective LCD, 2.2-inch Transflective LCD, 2.4-inch Transflective LCD, 3.0-inch Transflective LCD, 3.5-inch Transflective LCD, It has the characteristics of visible under sunlight, full viewing angle, ultra-low power consumption, etc., and is very popular among customers.

  • How to prevent the LCD screen backlight from turning yellow

    To avoid the problem of yellowing of the backlight material of the TFT LCD screen, it is necessary to start from many aspects such as material characteristics, usage environment, and driving method. In particular, it is necessary to pay attention to the selection and maintenance of the core components of the backlight module (such as LED lamp beads, light guide plates, diffusion films, etc.).

  • 3.2 inch IPS display 320*480 supports multiple interfaces, suitable for single chip microcomputer

  • Are incell LCD screens worth choosing? What are its technologies and advantages?

    First of all, the advantage of incell LCD screens is that they are thinner and lighter than traditional TFT displays because they integrate the touch sensor and display layer into a single layer. Traditional TFT LCD screens require external mounting to fit the touch screen, which increases the thickness. In addition, the touch screen also requires a separate design of a cable, which will occupy the space inside the machine. Incell LCD screens only need to be attached to a layer of glass cover to form a complete LCD touch screen assembly, which makes them ideal for portable devices such as smartphones and tablets. The reduction in thickness and weight makes the design more compact and stylish, which is very important for the trend of thinner and more portable devices.

  • 1.8-inch round screen with 360*360 resolution and support for SPI/MCU/QSPI/MIPI interfaces

    HJ1800-01, a 1.8-inch round LCD with IPS, full viewing angle, 360*360 resolution, and a contrast ratio of 1200. It supports multiple interfaces (SPI/MCU/QSPI/MIPI) via the IM port, and supports an ultra-wide operating temperature range of -30°C to 80°C. The driver IC is the ST77916, and standard ICs are available for a long time. This 1.8-inch round LCD features a capacitive touchscreen and I2C interface. The touchscreen is laminated to the LCD for easy debugging.

Send Inquiry

X
We use cookies to offer you a better browsing experience, analyze site traffic and personalize content. By using this site, you agree to our use of cookies. Privacy Policy
Reject Accept