China 1.14 inch TFT High Brightness screen 135*240 SPI Manufacturers, Suppliers, Factory

Shenzhen Hongjia Technology has launched a 3.0-inch IPS display for the handheld small game console market. It has a resolution of 320*480 high-definition and delicate, 4:3 structure, horizontal display, and ultra-narrow frame; it uses high-brightness and low-power LED lights, which are clearly readable in outdoor sunlight, and the brightness can reach 1000 lumens; it supports 16/18/24BIT RGB interface and 39PIN standard interface.

Our company has developed a 4-inch round display screen with RGB interface, supporting 16/18/24BIT, 720*720 resolution, and 50PIN. It has been mass-produced and customers are welcome to email us for consultation

Ordinary LCD screens use CCFL light sources, that is, cold-cathode fluorescent lamps (similar to the scanning lamps in the copy), with one on each side of the screen and a backlight on the back of the display, which is composed of fluorescent substances. The light sources on both sides can be evenly distributed on the back of the entire screen, so that the entire screen can be evenly illuminated. However, due to technical limitations, the brightness of such a display is not completely uniform, but it is difficult to find it. At the same time, the lamp also has a certain lifespan, and it will turn yellow after a long time.

Backlighting is used in small, light, flat-panel liquid crystal displays (LCDs) and other electronic devices that require backlighting, including handheld devices as small as the palm of your hand, and large-screen TVs. The goals of backlight design include low power consumption, ultra-thin, high brightness, uniform brightness, large area, and control of different width and narrow viewing angles. To achieve these challenging design goals with controlled cost and rapid implementation, computer-aided optical design tools must be used for design. This article introduces the characteristics of LightTools optical design and analysis software from ORA Company in the United States, which can be used to develop the most advanced backlight design applications today.

Many customers often encounter bad or dark spots on the display screen. How do bad spots occur?

Static electricity can be grounded in the early hardware design. In the later production, pay attention to wearing static bracelets and finger cots to avoid holding the display screen directly with your hands. Then, static electricity experiments can be performed to detect whether the static electricity of the entire machine meets the standards.