China 1.6 inch Round lcd display module MIPI Manufacturers, Suppliers, Factory

The 2.0-inch 1U chassis TFT screen produced by Shenzhen Hongjia Technology Co., Ltd. has an outer size of 34.76mm*47.86mm, which can be perfectly installed in a 1U chassis. It has a resolution of 240*320, 4 high-brightness lights, IPS full viewing angle, supports SPI and MCU interfaces, and can be displayed horizontally. Customers are welcome to email for consultation.

If customers encounter screen display problems and want to check whether they are caused by flexible cables, they can check from the following aspects, including appearance, material, process, and functional testing to distinguish: It should be noted that the display screen may not display normally sometimes not because of the flexible cable itself, but because of interface oxidation or motherboard problems, but the flexible cable is the easiest to check as a connecting component. Therefore, when distinguishing problems, multiple factors should be considered comprehensively, and you cannot just look at one point.

LCD screen itself has problems. If it is indeed the screen itself that is at fault after testing with relevant instruments, in addition to replacing a new LCD screen, the device-related software should be debugged and optimized so that the screen can work with the motherboard's CPU. The best way is to increase the OSC frequency of the IC and see how the LCD screen flickers. Of course, if the TFT LCD screen has separate row and column drivers, you can also adjust it by setting the driver chip.

First of all, the advantage of incell LCD screens is that they are thinner and lighter than traditional TFT displays because they integrate the touch sensor and display layer into a single layer. Traditional TFT LCD screens require external mounting to fit the touch screen, which increases the thickness. In addition, the touch screen also requires a separate design of a cable, which will occupy the space inside the machine. Incell LCD screens only need to be attached to a layer of glass cover to form a complete LCD touch screen assembly, which makes them ideal for portable devices such as smartphones and tablets. The reduction in thickness and weight makes the design more compact and stylish, which is very important for the trend of thinner and more portable devices.

Shenzhen Hongjia has mass-produced 5.5-inch display screens for drone remote controllers, with a brightness of 1200cd/m2, clear and readable in the sun, a resolution of up to 1080*1920, high-definition and delicate, with multi-point capacitive touch screens, GT911 touch screen chips, and anti-glare coatings on the touch screen surface. It does not reflect light in the sun, and has anti-fingerprint coatings. Fingerprints will not remain when operating the remote controller, and the display interface will remain clean.

HJ4160-01, a 4.16-inch horizontal LCD screen with IPS full viewing angle, 1280*960 HD resolution, MIPI interface support, operating temperature range of -30 to 85°C (-30 to 85°C), storage temperature range of -30 to 85°C (-30 to 85°C), high contrast, 30-pin connector, capacitive touchscreen solder pads, and the GH7005-01 driver IC. Brightness reaches 1000 lumens and is sunlight-readable. Customization is also available, and small orders are accepted. Customers are welcome to email us for inquiries.