EnglishEnglish
Home > Products > 2.1 inch Round touch screen 24PIN mipi

China 2.1 inch Round touch screen 24PIN mipi Manufacturers, Suppliers, Factory

Bear "Customer 1st, Good quality first" in mind, we work closely with our prospects and supply them with efficient and professional services for 2.1 inch Round touch screen 24PIN mipi,2.1 inch Round tft display interface MIPI,2.1 inch Round lcd 480*480 MIPI 24PIN,2.1 inch Round tft lcd interface MIPI,2.1 inch Round IPS High Brightness screen, should you might have any query or wish to place an initial get be sure to usually do not wait to get hold of us.
2.1 inch Round touch screen 24PIN mipi Lamp, Our organization. Situated inside the national civilized cities, the visitors is very easy, unique geographical and economic situations. We pursue a "people-oriented, meticulous manufacturing, brainstorm, construct brilliant" organization. hilosophy. Strict top quality management, fantastic service, reasonable cost in Myanmar is our stand on the premise of competition. If vital, welcome to make contact with us by our web page or telephone consultation, we're likely to be happy to serve you.

Related Products

Hot Products

  • 1.46 inch Round LCD

    1.46 inch Round LCD

    This product is a 1.46 inch ROUND LCD, QSPI-1 channel, 12PIN, 1.46 inch ROUND LCD has only 12PIN, simple and easy to understand, convenient to design, and can be shipped with a touch screen.
    size: 1.46 inch
    Number of Pixels: 360*360
    Viewing direction: ALL O’CLOCK/ IPS
    LCM Driver IC: ST77916
  • 3.5 inch TFT LCD Module Highlight 40PIN

    3.5 inch TFT LCD Module Highlight 40PIN

    Find a huge selection of 3.5 inch TFT LCD Module highlight 40PIN from China at SZ HONGJIA TECHNOLOGY SHARES LIMITED. Provide professional after-sales service and the right price, looking forward to cooperation. 3.5 inch TFT LCD IPS 320*480 resolution ST7796 interface 40PIN SPI/RGB.
    size : 3.5 inch
    Number of Pixels : 320*480
    Viewing direction : ALL
    LCM Driver IC : ST7796
  • 2.3 inch Long Strip LCD Module

    2.3 inch Long Strip LCD Module

    HONGJIA is a large-scale 2.3 inch Long Strip LCD Module manufacturer and supplier in China. SPI /QSPI/MCU_8bit, high resolution 200*480
    size : 2.3 inch
    Number of Pixels : 200*480
    Viewing direction : ALL O’CLOCK/ IPS
    LCM Driver IC : GC9B71
  • 2.4 inch TFT LCD Module Highlight 45PIN

    2.4 inch TFT LCD Module Highlight 45PIN

    As the professional manufacture, we would like to provide you HONGJIA 2.4 inch TFT LCD. And we will offer you the best after-sale service and timely delivery. 2.4 inch TFT LCD Module highlight 45PIN IPS, 240*320 interface SPI/MCU/RGB highlight 1000nits.
    size : 2.4 inch
    Number of Pixels : 240*320
    Viewing direction : ALL
    LCM Driver IC : ST7789
  • 1.14 inch Long Strip LCD Module

    1.14 inch Long Strip LCD Module

    HONGJIA is a professional 1.14 inch Long Strip LCD Module manufacturer and supplier in China. 4-wire SPI, IPS sunlight readable 13PIN, 135*240.
    size : 1.14 inch
    Number of Pixels : 135*240
    Viewing direction : ALL O’CLOCK/ IPS
    LCM Driver IC : ST7789
  • 2.3 inch TFT LCD Module 320*240

    2.3 inch TFT LCD Module 320*240

    HONGJIA is a professional leading China 2.3 inch TFT LCD Module 320*240 manufacturer with high quality and reasonable price. Welcome to contact us. 2.3 inch TFT LCD horizontal screen 320*240 resolution, interface SPI/MCU/RGB ILI9342C.
    size : 2.3 inch
    Number of Pixels : 320*240
    Viewing direction : wide viewing angle
    LCM Driver IC : ILI9342C
  • Related Blog
  • Reviews

  • The advantage of using a high-brightness display screen on the drone remote controller is more obvious than using a mobile phone as a display screen

    Shenzhen Hongjia has mass-produced 5.5-inch display screens for drone remote controllers, with a brightness of 1200cd/m2, clear and readable in the sun, a resolution of up to 1080*1920, high-definition and delicate, with multi-point capacitive touch screens, GT911 touch screen chips, and anti-glare coatings on the touch screen surface. It does not reflect light in the sun, and has anti-fingerprint coatings. Fingerprints will not remain when operating the remote controller, and the display interface will remain clean.

  • 3.95-inch square LCD screen 480*480 INCELL process leads the future direction of thermostat panel

    Standard RGB interface, 40PIN, support 16/18 bits, ST7102 driver IC, I2C interface

  • 2.55-inch Landscape LCD Screen 320*240 with SPI/MCU Interface

    2.55-inch landscape LCD screen, model: HJ2550-01, 2.55-inch TFT true-color display, 320*240 resolution, supports SPI/MCU interface, also supports RGB interface, 45-pin connector, uses ILI9342C driver IC,

  • Unveiling the Power of 2.0 inch 1U TFT Displays for Server Rooms

    The 2.0-inch 1U chassis TFT screen produced by Shenzhen Hongjia Technology Co., Ltd. has an outer size of 34.76mm*47.86mm, which can be perfectly installed in a 1U chassis. It has a resolution of 240*320, 4 high-brightness lights, IPS full viewing angle, supports SPI and MCU interfaces, and can be displayed horizontally. Customers are welcome to email for consultation.

  • Is it better to use a B TO B connector or a gold-finger plug for flexible display cables?

    In today's consumer electronics industry, both technologies are widely used, often appearing in the same device. For example, in an ultra-thin laptop, the main connection between the motherboard and screen might use direct gold-finger connectors for the sake of thinness, while the connections between the motherboard and components like the touchpad and keyboard might use traditional connectors. If reliability and maintainability are more important than saving a fraction of a millimeter in thickness, then connectors are a more reliable and mature choice. If you are building an ultra-thin, cost-sensitive new product with a high-precision automated production line, you should carefully consider the direct gold-finger connector solution.

  • How to avoid poor welding of LCD screen cables and backlight cables

    LCD and backlight cables require soldering for proper display. Traditionally, factory workers solder these cables manually. Manual soldering is slow and highly dependent on the worker's soldering proficiency. Unskilled workers can sometimes cause cold soldering, leading to sporadic soldering defects when shipped to customers, causing the display to malfunction.

Send Inquiry

X
We use cookies to offer you a better browsing experience, analyze site traffic and personalize content. By using this site, you agree to our use of cookies. Privacy Policy
Reject Accept