China 2.95 inch Capacitive touch display module 480*854 Manufacturers, Suppliers, Factory

2.4-inch 240*320 interface SPI/RGB/MCU 2.4-inch 240*320 interface MIPI 2.4-inch 240*320 interface SPI 2.4-inch 320*480 interface MIPI/RGB 2.4-inch 480*640 interface MIPI/RGB 2.4-inch 272*480 interface RGB/MIPI 2.4-inch 272*480 interface SPI/MCU/RGB 2.4-inch 240*320 semi-transparent and semi-reflective 2.4-inch 240*320 high brightness 1000nits The above products are all IPS, using ILI9341 and ST7789 driver ICs, can be high-brightness, support customization, welcome to email consultation.

In today's consumer electronics industry, both technologies are widely used, often appearing in the same device. For example, in an ultra-thin laptop, the main connection between the motherboard and screen might use direct gold-finger connectors for the sake of thinness, while the connections between the motherboard and components like the touchpad and keyboard might use traditional connectors. If reliability and maintainability are more important than saving a fraction of a millimeter in thickness, then connectors are a more reliable and mature choice. If you are building an ultra-thin, cost-sensitive new product with a high-precision automated production line, you should carefully consider the direct gold-finger connector solution.

LCD screen itself has problems. If it is indeed the screen itself that is at fault after testing with relevant instruments, in addition to replacing a new LCD screen, the device-related software should be debugged and optimized so that the screen can work with the motherboard's CPU. The best way is to increase the OSC frequency of the IC and see how the LCD screen flickers. Of course, if the TFT LCD screen has separate row and column drivers, you can also adjust it by setting the driver chip.

Shenzhen Hongjia mass-produces 3.4-inch square LCD screens, including 3.4-inch square TFT screens. Model: HJ3400-01, resolution: 480*480, RGB interface, compatible with 16/18/24-bit, driver IC is ST7701S, also supports MIPI interface. Customization services are available. Welcome to inquire via email.

The LCD screen itself does not emit light, and a backlight needs to be added to the back of the glass for normal display. This involves how to test the surface brightness and backlight uniformity of the LCD screen. The brightness of the LCD screen surface and backlight brightness are measured through BM -7 equipment test, the test is more accurate when the display is powered normally and displays a solid color picture.

4.0inch display supports SPI/MCU interface, supports horizontal screen display、8/16BIT MCU+SPI