China 4 inch AMOLED display 360*640 Manufacturers, Suppliers, Factory

Some customers are still not very clear about the resolution of the display screen. We will explain it here. The resolution of the LCD screen refers to the number of pixels of the LCD screen, that is, the number of dot matrix, which is usually the number of pixels in the horizontal direction multiplied by the number of pixels in the vertical direction. Under the same LCD screen size, the higher the resolution dot matrix, the clearer and more delicate the display image effect is.

At present, our company has 3 fully automatic FOG production lines and 3 fully automatic backlight assembly lines, with a monthly production capacity of 800K. Shenzhen Hongjia Technology has 12 years of industry experience, specializing in R&D, production and sales of 1.14-inch to 15-inch display screens and matching touch screens. Customers are welcome to email for consultation.

Many customers frequently request a 5-inch IPS LCD screen with a vertical 720*1280 resolution and a 2-channel MIPI interface. However, most LCD manufacturers on the market only offer 4-channel MIPI interfaces. To meet customer needs, engineers at Shenzhen Hongjia Technology have specifically developed a 5-inch LCD screen that supports 2/3/4 channels, with a 720*1280 resolution, vertical orientation, and MIPI interface. It uses the traditional driver IC: ILI9881C, and the capacitive touch screen IC is GT911.

Shenzhen Hongjia Technology is a manufacturer specializing in the production of Transflective LCD modules, accepting customization, and has developed and mass-produced 2.0-inch Transflective LCD, 2.2-inch Transflective LCD, 2.4-inch Transflective LCD, 3.0-inch Transflective LCD, 3.5-inch Transflective LCD, It has the characteristics of visible under sunlight, full viewing angle, ultra-low power consumption, etc., and is very popular among customers.

In today's consumer electronics industry, both technologies are widely used, often appearing in the same device. For example, in an ultra-thin laptop, the main connection between the motherboard and screen might use direct gold-finger connectors for the sake of thinness, while the connections between the motherboard and components like the touchpad and keyboard might use traditional connectors. If reliability and maintainability are more important than saving a fraction of a millimeter in thickness, then connectors are a more reliable and mature choice. If you are building an ultra-thin, cost-sensitive new product with a high-precision automated production line, you should carefully consider the direct gold-finger connector solution.

Our company has developed a 3.5-inch horizontal screen TFT with a resolution of 320*240, which can support SPI interface, 8/16-bit MCU interface, and 16/18-bit RGB interface. It can be used normally on single-chip microcomputers