China 5 inch lcd display module 480*854 MIPI Manufacturers, Suppliers, Factory

First, it should be clear that the main type of radiation produced by LCD monitors is low-frequency electromagnetic radiation, and its radiation level is far below international safety standards. Compared with the old cathode ray tube (CRT) monitors, LCDs have much less radiation. Therefore, the impact of LCD devices on the human body is very limited. However, there are ways to reduce the impact of this radiation. In this article, we will explore some effective ways to reduce LCD screen radiation.

Static electricity can be grounded in the early hardware design. In the later production, pay attention to wearing static bracelets and finger cots to avoid holding the display screen directly with your hands. Then, static electricity experiments can be performed to detect whether the static electricity of the entire machine meets the standards.

2.4-inch 240*320 interface SPI/RGB/MCU 2.4-inch 240*320 interface MIPI 2.4-inch 240*320 interface SPI 2.4-inch 320*480 interface MIPI/RGB 2.4-inch 480*640 interface MIPI/RGB 2.4-inch 272*480 interface RGB/MIPI 2.4-inch 272*480 interface SPI/MCU/RGB 2.4-inch 240*320 semi-transparent and semi-reflective 2.4-inch 240*320 high brightness 1000nits The above products are all IPS, using ILI9341 and ST7789 driver ICs, can be high-brightness, support customization, welcome to email consultation.

First of all, the advantage of incell LCD screens is that they are thinner and lighter than traditional TFT displays because they integrate the touch sensor and display layer into a single layer. Traditional TFT LCD screens require external mounting to fit the touch screen, which increases the thickness. In addition, the touch screen also requires a separate design of a cable, which will occupy the space inside the machine. Incell LCD screens only need to be attached to a layer of glass cover to form a complete LCD touch screen assembly, which makes them ideal for portable devices such as smartphones and tablets. The reduction in thickness and weight makes the design more compact and stylish, which is very important for the trend of thinner and more portable devices.

This 4.3-inch INCELL LCD screen is widely used in consumer electronics, medical equipment, industrial equipment, military equipment, and beauty devices. We also offer one-stop customization services. We welcome inquiries by email.

In short, for small-sized LCD screens, QSPI is a better choice: through pin multiplexing and queue mechanism, while maintaining sufficient transmission rate, PCB design and master control resource usage are greatly simplified, which is especially suitable for scenarios that require dynamic display and limited space. SPI is only applicable to extreme cases where the driver IC does not support QSPI or has extremely simple functions. When actually selecting, it is necessary to first confirm the interface specifications of the screen driver IC (some screens support both SPI and QSPI, which can be switched by configuring pins).